Targets

Targets and ring dimensions

TargetSpotter scores six kinds of target. Their dimensions are listed here in full – a reference for printing, setting up and checking.

What do I need for which discipline?

The longer the distance, the fewer ways there are to get the target image. The table shows which equipment TargetSpotter can score for each discipline.

Discipline Aiming mark Inner ten Size Ring range Phone + scope Scope camera Wi-Fi camera
10 m air pistol 59.5 mm 5 mm 170 × 170 mm Ring 5 and up supported supported supported
25 m duel 500 mm 50 mm 550 × 520–550 mm Ring 8 and up supported supported supported
25 m Speed (rifle and handgun) 200 mm – 340 × 340 mm Zones 10 and 7 supported supported supported
25 m precision 200 mm 25 mm 550 × 520–550 mm Ring 6 and up supported supported supported
25 m precision BDS (Z9) 200 mm 25 mm 550 × 550 mm Ring 5 and inward supported supported supported
50 m pistol 200 mm 25 mm 550 × 520–550 mm Ring 6 and up not supported supported supported
50 m smallbore 112.4 mm 5 mm 250 × 250 mm Ring 1 and up not supported not supported supported
100 m rifle 204 mm 17 mm 395 × 395 mm Ring 1 and up not supported not supported supported
100 m rifle with scope (Z4) 112 mm 13.5 mm 210 × 297 mm Ring 1 and inward not supported not supported supported
300 m rifle 600 mm 50 mm 1300 × 1300 mm Ring 1 and up not supported not supported supported

Recommended scope magnification: 45× to 60×.

All figures are the outer diameter of the ring in millimetres.

25 m precision / 50 m pistol

Classic precision target, automatic bullseye detection. The same target is used for 50 m pistol. DSB target no. 4.

Ring Diameter
1 500 mm
2 450 mm
3 400 mm
4 350 mm
5 300 mm
6 250 mm
7 200 mm
8 150 mm
9 100 mm
10 50 mm
Inner ten 25 mm

Aiming mark: rings 7–10 · 200 mm · Size 550 × 520–550 mm

Same target as 25 m precision (DSB no. 4).

25 metre precision target, also used for 50 m pistol

25 m duel

Includes a duel program with ISSF timing and automatic series scoring. DSB target no. 10.

Ring Diameter
5 500 mm
6 420 mm
7 340 mm
8 260 mm
9 180 mm
10 100 mm
Inner ten 50 mm

Aiming mark: rings 5–10 · 500 mm · Size 550 × 520–550 mm

This target carries rings 5 to 10 only.

25 metre duel target

25 m precision BDS (Z9)

BDS precision target for handguns at 25 metres, target no. 9. Ring dimensions as on DSB target no. 4, with its own sheet size.

Ring Diameter
1 500 mm
2 450 mm
3 400 mm
4 350 mm
5 300 mm
6 250 mm
7 200 mm
8 150 mm
9 100 mm
10 50 mm
Inner ten 25 mm

Aiming mark: rings 7–10 · 200 mm · Size 550 × 550 mm

BDS 25 m precision target for handguns

25 m Speed

BDS Speed target (target no. 10) for rifle and handgun at 25 metres. No rings, but two scoring zones: white inner disc 10, black outer disc 7.

Zone Diameter
7 200 mm
10 100 mm

Two scoring zones: 10 inside, 7 outside · Size 340 × 340 mm

BDS 25 m Speed target with two scoring zones

10 m air pistol

Small bullseye, fine ring spacing – tuned detection thresholds. DSB target no. 7.

Ring Diameter
1 155.5 mm
2 139.5 mm
3 123.5 mm
4 107.5 mm
5 91.5 mm
6 75.5 mm
7 59.5 mm
8 43.5 mm
9 27.5 mm
10 11.5 mm
Inner ten 5 mm

Aiming mark: rings 7–10 · 59.5 mm · Size 170 × 170 mm

10 metre air pistol target

50 m smallbore

Smallbore target for 50 metres, detected across the full ring area. DSB target no. 3.

Ring Diameter
1 154.4 mm
2 138.4 mm
3 122.4 mm
4 106.4 mm
5 90.4 mm
6 74.4 mm
7 58.4 mm
8 42.4 mm
9 26.4 mm
10 10.4 mm
Inner ten 5 mm

Aiming mark: rings 3–10 · 112.4 mm · Size 250 × 250 mm

50 metre smallbore target, DSB target no. 3

100 m rifle

Target for match and free rifles at 100 metres, scored across the full ring range. BDS target.

Ring Diameter
1 340 mm
2 306 mm
3 272 mm
4 238 mm
5 204 mm
6 170 mm
7 136 mm
8 102 mm
9 68 mm
10 34 mm
Inner ten 17 mm

Aiming mark: rings 5–10 · 204 mm · Size 395 × 395 mm

The diameters of rings 1 to 9 follow arithmetically from the 17 mm ring width; the ten ring measures 34 mm.

BDS 100 metre rifle target for match and free rifles

100 m rifle with scope (Z4)

BDS target for all rifles with a telescopic sight at 100 metres, target no. 4. Small A4 portrait sheet, detected across the full ring area.

Ring Diameter
1 180 mm
2 163 mm
3 146 mm
4 129 mm
5 112 mm
6 95 mm
7 78 mm
8 61 mm
9 44 mm
10 27 mm
Inner ten 13.5 mm

Aiming mark: rings 5–10 · 112 mm · Size 210 × 297 mm

BDS 100 m target for rifles with telescopic sights

300 m rifle

Full-bore target for 300 metres to ISSF dimensions, scored across the full ring range. DSB target.

Ring Diameter
1 1000 mm
2 900 mm
3 800 mm
4 700 mm
5 600 mm
6 500 mm
7 400 mm
8 300 mm
9 200 mm
10 100 mm
Inner ten 50 mm

Aiming mark: rings 5–10 · 600 mm · Size 1300 × 1300 mm

300 metre rifle target to ISSF dimensions

Sources

The DSB target dimensions follow the ISSF technical rules (rule 6.3.4). The 100 m target dimensions come from the BDS sport handbook. Tolerances are omitted here – the current rulebook always takes precedence.

Get TargetSpotter